Guide rail type lift freight elevator

 

Guide rail type elevator is mainly used for steel structure workshop, plant, basement goods up and down delivery; underground garage and two floors above the high building, can not excavate the pit place, the top floor height can not reach the requirements of the occasion and other relatively difficult to solve the narrow space. It can be installed both indoors and outdoors.

I. Full specification of guideway type elevator, can be customized

1. The lift freight elevator adopts high strength rectangular tube welded rail, with high weighing quality, not easy to deformation, etc. The table size design is flexible and various specifications are available, the lifting height can be customized according to customer requirements, the bearing quality can be up to 30 tons. The hydraulic system is set up with fall prevention and interactive chain between upper and lower doors, and the operation buttons can be set up on each floor and the working surface of the lift table, so that you can control the lift of the freight elevator no matter which floor you are on.
2. This product can be designed flexibly according to the actual situation of the customer’s site. 1 ton and the following load quality can be designed as single cylinder or double side cylinder according to the lifting height. As long as you provide us with the actual size of the reserved mouth, the load quality of the lift and the height of the lift, we can produce a simple lift for you with high efficiency, good quality and maintenance-free.

II. Guide rail lift freight elevator safety is guaranteed

1. The equipment runs smoothly, simple and reliable operation, with hydraulic and electrical protection, economic and convenient goods transfer, the weight of the lifted objects is large and safe and stable, other industries can also be used for delivery elevators.

2. Manual descent in power failure and emergency stop button, convenient, quick and practical.

3. The floor door can be passed through, and the inside and outside of the plant can be poked open with each other, which is convenient and space-saving.

4. especially suitable for 2-5 layer steel structure plant, both inside and outside can be used.

5. Pump station adopts imported pump station, if the speed requirement is too high, adopt imported custom pump station to achieve the ideal delivery requirement.

6. The oil cylinder and seals are made of imported parts to solve the problem of unstable oil pressure and oil leakage of parts for customers.

Comments or leave us a message:

More Posts You May Find Interesting