Mobile scissor lift platform

Hydraulic lifting platform operating procedures.

1. The hydraulic lifting platform (hereinafter referred to as the platform) has been inspected and tested before leaving the factory, and all technical indicators have reached the
Design requirements, use only need to connect the ground. Hydraulic and electrical systems do not need to be adjusted.
2. Platform before use to carefully check the hydraulic and electrical systems, no leakage or bare leakage before use.
3. Platform empty run 1-3 times before the load operation.
4. The center of the load should be in the center of the working table as far as possible.
5. The movable doors at both ends of the guardrail should be closed firmly before operation.

Safety operation requirements.

1. Staff should not disassemble electrical appliances at will to prevent electric shock or misconnection.
2 lifting platform work platform below the maintenance, mobile scissor lifting platform, must be suspended, support the lifting platform work platform, single column aluminum alloy lifting platform, to prevent the lifting platform suddenly fall, resulting in casualties.
3. shall not arbitrarily adjust the relief valve. Each component in the hydraulic system is working under the specified pressure. Arbitrary
After arbitrary adjustment of the relief valve, electric small lifting platform, may cause the hydraulic system is not normal operation. There will be unnecessary damage to people, machines and things. 4.
4. Between any parts of the hydraulic system, the pressure must be unloaded first so that the pressure oil will not be ejected and the table will suddenly slide.