Hydraulic lift aerial work to prevent aerial falling objects

First, hydraulic lift aerial falling objects cause analysis

1, hydraulic hoist all kinds of crane equipment (steel wire rope, unloading card, etc.) due to insufficient load-bearing capacity and be pulled off or broken resulting in falling objects.
2, hydraulic lift overweight or misoperation caused by mechanical damage, tipping, hanging parts falling.
3, aerial work when pulling the power cord or leather pipe will be dragged sporadic objects fall or walking objects will touch down.
4、Hydraulic lift lifting process hanging objects on the sporadic objects are not tied or cleaned and fall.
5、Hydraulic lift for load-bearing platform load-bearing capacity is not enough to make the object fall.
6、When holding objects at height and walking or transferring objects, the objects fall down.
7、Throwing objects downward on the operating platform of the hydraulic lift.
8、No anti-fall measures when cutting objects and materials at height.

Second, the hydraulic lift to prevent injuries from falling objects aloft safety measures

1, each load-bearing temporary platform should be specially designed and accounted for its load-bearing capacity, welding by professional welders and checked and qualified before allowing the use.
2、Up and down to pass the object with the rope, not up and down throwing, passing small workpieces, tools when using the tool bag.
3、For important and large lifting, detailed technical measures and security measures for lifting construction must be formulated, and a person in charge, unified command, configuration of full-time security supervision personnel.
4、Cleaning or tying of debris and small items on the hoist before lifting.
5、Non-professional heavy lifters are not allowed to engage in lifting operations.
6、Strengthen the management of cleaning and storage of small articles on the aerial work place and scaffolding, and do a good job in preventing objects from falling.
7、When working at height, you must wear a tool bag and tie a safety rope to large tools.
8, try to avoid crossover operations, demolition of the frame or lifting operations, the work area set up a warning area, strictly prohibit the entry of extraneous personnel.
9, lifting scattered items to use special lifting tools for lifting.
10、There should be anti-falling measures when cutting objects and materials.

Comments or leave us a message:

More Posts You May Find Interesting