A brief discussion of several important issues that can occur in scissor lifts

Scissor lifts are relatively common lifting equipment with a high number of conventional lifts and high performance. It is also one of the more widely used lifting equipment. According to our company’s summary and investigation of lift equipment problems in recent years, we can summarize several important problems that often occur in scissor lifts.

Scissor lifts, especially mobile scissor lifts, are more likely to have the problem of table tilt. The causes of table tilt can be divided into two categories: human defects and product defects. The human factor is mainly due to inattention to daily use and non-compliance with prescribed methods causing various lift problems.

Then it is caused by the defects of the lifting platform itself and the wear and tear after using.

1. Serious wear and tear of the oil cylinder, uneven damage to the inner closure ring or blockage of the inner ring may lead to uneven force, thus leading to uneven lifting height of the cylinder, it is recommended to check carefully whether the cylinder is normal.

2. Foreign matter enters inside the oil supply pipe, resulting in uneven supply of hydraulic oil and uneven table surface, it is suggested to check carefully whether the oil supply pipe is smooth.

3. The inconsistent production size of the support rod is the quality defect of the scissor lift equipment itself, it is recommended to contact the manufacturer for replacement, the possibility of this situation is very small.

4. The inconsistency of the shaft in the middle of the support rod leads to the lift platform not working normally, the platform is seriously damaged and the worktable is tilted, please check carefully.