The product is mainly used for transporting goods up and down between various working floors; lifting cars between floors of three-dimensional garage and underground garage, etc. The hydraulic system of the product is set up with anti-fall and overload safety protection devices, and the operation buttons can be set up on each floor and working table to realize multi-point control. The product structure is strong, the load capacity is large, the lift is stable, the lift installation and maintenance is simple and convenient, it is the ideal equipment for transporting goods between low floors instead of elevators in an economical and practical way.
According to the installation environment and use requirements of the lifting platform, choose different optional configurations, can achieve better results. Set four-wheeled mobile and two-wheeled traction in one, using cars, tricycles or battery car chassis to do the platform chassis, the use of the car engine or DC power, both driving and driving platform lift, widely used in urban construction, oilfield, transportation, municipal, factory and other industries of aerial work.
Using external power to do traction, using three-phase power or diesel engine to do power, easy and fast to move, suitable for long-distance work, mainly for oil, electric power, urban construction, post and telecommunications and other industries in the field of high-altitude work. Only trained and qualified personnel can operate the lift. Lifts on the operating personnel hanging safety belt. Before the lift is put into operation, the chassis needs to be leveled with the legs and the feet padded. The operator concentrates on the order of operation as specified in the manual. In the process of lifting the platform, should be smooth, flexible, no sudden jump or jamming phenomenon, if the above phenomenon occurs, should immediately stop to check, and try to eliminate before working.
Folding lift lifting platform: a home folding lift, belongs to a kind of lift, especially a home folding lift. Its beam is composed of two steel plates, and it is connected by a number of inverted “U” shaped connection card welding, forming a gap in the middle, the front and rear ends are connected through the motor and electric hoist connected to the skid in the gap formed by the track. Thus overcoming the existing home lift existing structural irrational and inconvenient to use and other defects. The utility model has the advantages of reasonable structure, simple manufacture, low cost, easy to use, strong practicality and can be used by multiple households as well as a single household.
Wall-mounted lift: applicable to the workplace where the pit cannot be excavated, with single collapse, double collapse type, the lift is smooth, safe and reliable, suitable for supermarkets, hospitals, restaurants, workshop goods transfer and other industries.
Vehicle-mounted lift: the lift is mounted on the car aerial work equipment. It is composed of chassis, working boom, three-dimensional full rotation mechanism, flexible clamping device, hydraulic system, electrical system and safety device, etc.
Crankshaft lift: lifting equipment for aerial work, can cross obstacles for aerial work, the platform lifts to any position, can work while walking, compact structure, flexible steering, the width of its floor equipment can enter narrow passages and crowded work areas. Spare power device, can operate the work platform reset, convenient transport mode, can be towed to any place. Easy to identify the operating panel, multiple mechanical, electrical and hydraulic safety protection, the integrated hydraulic and electrical integration system. The curved arm aerial work truck is widely used for installation and maintenance and aerial work in municipal, electric power, street lighting, advertising, communication, photography, gardening, transportation, wharf, airport and port, large industrial and mining enterprises and other industries.
