Scissor Lifts

Scissor lift is a widely used special equipment for aerial work. Its scissor fork mechanical structure makes the lifting platform have high stability, wide working platform and high carrying capacity, which makes the aerial work range bigger and suitable for multiple people to work at the same time. It makes the work efficiency higher and safety more secure.


Scissor lifts are divided into: fixed scissor lifts, mobile scissor lifts, self-propelled scissor lifts, vehicle-mounted scissor lifts, manual traction scissor lifts, special scissor elevators for cargo.

mobile scissor lift3

Stationary lifts


The product is mainly used for transporting goods up and down between various working floors; lifting cars between floors of three-dimensional garage and underground garage, etc. The hydraulic system of the product is equipped with anti-fall and overload safety protection devices, and the operation buttons can be set on each floor and working table to realize multi-point control. The product structure is strong, the load capacity is large, the lift is stable, the lift installation and maintenance is simple and convenient, it is the ideal equipment for transporting goods between low floors instead of elevators in an economical and practical way. According to the installation environment and use requirements of the lifting platform, choose different optional configurations, can achieve better results.


Self-propelled scissor lift

Able to travel fast and slow at different heights of working conditions, can operate the platform in the air conveniently to continuously complete up and down, forward, backward, turning and other work. The use of high-quality structural steel, laser welding electronic manipulator single-sided welding double-sided forming process, Italian original imported hydraulic pump station or Anshan joint venture hydraulic pump station, aerospace cartridge valve technology, the platform is equipped with level alarm meter, balance valve, automatic safety plate and other alarm devices, the platform is safe, reliable and durable, the operating height of up to 12 meters, load 300 kg, the fence can be extended horizontally greatly expand the operating range, the whole machine One-year warranty, five-year warranty for key components, suitable for factory workshops, square lobby airport, park and other customers with aerial work needs.


Vehicle-mounted scissor lift

Set four-wheeled mobile and two-wheeled traction in one, using cars, tricycles or battery car chassis to do the platform chassis, the use of the car engine or DC power, both driving and driving platform lift, widely used in urban construction, oilfield, transportation, municipal, factory and other industries of aerial work.


Traction type hoist

Using external power to do traction, using three-phase power or diesel engine to do power, easy and fast to move, suitable for long-distance work, mainly used in petroleum, electric power, urban construction, post and telecommunications and other industries field aerial work.


Scissor lift platform operating procedures

  1. Only trained and qualified personnel can operate the lift.
  2. Lifts on the operating personnel must be hung with safety belts.
  3. Before the lift is put into operation, the chassis needs to be leveled with the legs and the legs padded.
  4. The operator must concentrate on the order of operation as specified in the manual.
  5. In the process of lifting the table, it should be smooth and flexible, no sudden jump or jamming phenomenon, if the above phenomenon occurs, it should stop immediately to check and try to eliminate before working.
  6. Hydraulic system should stop immediately to check if one of the following conditions occurs, and take measures to eliminate.
  7. a) abnormal noise.
  8. b) rapid increase in oil temperature.
  9. c) abnormal cylinder pressure and return pressure.
  10. d) oil leakage in the oil circuit.
  11. e) press the “up” or “down” button, or push the “up” or “down” manual valve after The working table does not move.
  12. Press the “up” or “down” button after the action, if the table does not move, in addition to the hydraulic system should be checked, should also check the lifting mechanism has no jamming phenomenon, whether the electrical part of the broken line, whether overload.
  13. There should be safety headroom above the table
  14. In the power supply or table lifting process before the power is disconnected, the operator must pay attention to make all controllers are in the zero position.
  15. When the operator is working at height, the operator must not operate the lift at will.
  16. In the process of lifting the workbench, any part of the body of the person on the workbench must not exceed the limits of the workbench.
  17. When the operator leaves the lift, the lift power source must be cut off.

Comments or leave us a message:

More Posts You May Find Interesting